Tankless Water Heater Repair Fremont
Tankless Water Heater Repair Fremont Troubleshooting
Typically, most of the problems that could happen with a tankless water heater, causing it to need a repair are external aspects. Right here are some of them:
Improper venting. The most usual mistake with a tankless installation is using regular B-vent, which can quickly destroy the heat exchanger due to acidic condensation.
Incorrect sized gas supply line. Occasionally the supply line is undersized and was just attached to the existing line size. The size specified in the setup handbook has to be utilized.
The gas pressure is not appropriate. The working pressure should be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the design.
The wrong kind of gas that is being made use of – natural gas or liquid propane. It is not possible to use the non-specified kind.
Water flow or temperature level variation concerns. There are several things we will inspect to make certain they are working properly, like cleaning or changing the input filter, examining the check valve, inspecting the seals in the faucets and exploring to discover if there exists a cross flow someplace that must be fixed.
Hard Water Problems: In locations where the water is very hard, de-scaling will be needed regularly.
Environmental concerns. The heaters should be installed in a clean location with access to combustion air that is free from dust, lint, grease, or chemicals.
Do not hesitate to contact us of any problems you are having with your tankless hot water heater, or if you simply need some details on determining if having one could be a good solution for your home.